It is important to understand the differences between belt drive and direct drive air compressors. Using the right compressor will optimise the performance of air-powered or pneumatic tools and save you energy and money.
Belt drive and direct drive air compressors are commonly used types of rotary screw compressors. Factors to consider when deciding between these two types include the following:
Also consider air pressure pounds per square inch (PSI), cubic feet per minute (CFM), horsepower (HP) and revolutions per minute (RPM), as these factors can impact tool and compressor performance and safety. This is because every tool has specific output and pressure requirements.
Whether belt-driven or direct drive, both types of air compressors have advantages and disadvantages that will help you determine your choice.
A belt drive air compressor has a belt that is connected to the motor. When the motor runs, the belt moves the pump through pulleys. The diameters of the pulleys determine the speed and PSI of the compressor.
A belt drive air compressor is a good option for a home workshop. It is also suitable for an indoor shop with multiple work areas. A lubricated belt system will run efficiently, smoothly and quietly, making it less likely to disturb your neighbours.
If you use an air compressor intermittently at various speeds and power, you would probably prefer the flexibility of a belt drive model. For example, you may want to change the pressure from the manufacturer settings.
Your highest rated pneumatic tools may require 100 PSI, but your belt-driven compressor currently operates at 90 PSI. To increase the compressor PSI, you only have to replace the pulley.
The size of the pulleys will depend on the air pressure requirements of the tools you are using, along with HP and RPM. This flexibility makes belt-driven compressors a good choice for woodworking or auto repair shops.
The purchase and installation of a belt-driven air compressor are economical and straightforward. Maintenance is relatively simple for this type of compressor, which generally requires lubrication and monthly belt tension checks. Oil and filter changes are recommended every 500 to 1,000 hours of use.
Wear and tear can be the biggest problem with a belt drive air compressor. Belts can wear or even break and need replacing.
You must periodically check the alignment of the pulleys and the belt for proper tension. Improper alignment can cause the motor to run at too much or too little pressure and to overload. It can also cause the belt to fail.
A belt-driven air compressor will not tolerate a harsh environment or extreme temperatures. This type of compressor should not operate at temperatures below 0°C or at 40.5°C or higher.
A direct drive air compressor has a crankshaft that is directly attached to the motor. There are no intermediate pulleys or belts.
If you are a professional who constantly uses an air compressor at work, a direct drive model is the best option. Since the crankshaft attaches directly to the motor, less energy is lost during operation.
This energy efficiency makes it an economical choice for heavy industrial uses, such as jackhammers and building construction.
Direct drive air compressors have fewer moving components than belt drive compressors, so they do not require as many part replacements due to wear and tear. Therefore, they can withstand constant use in an industrial setting.
Since there are no pulleys, direct drive compressors do not need regular lubrication other than periodic oil changes and weekly topping up. Oil changes should occur every 100 to 500 hours, depending on the type of oil.
If you work in harsh conditions or extreme temperatures, a direct drive model is the option for you. This type of compressor is designed to withstand temperatures below freezing and up to 40°C. Synthetic oil is recommended during summer and winter because it will not change characteristics at extreme temperatures.
You may be able to change the outlet pressure range by one or two bars, but direct drive compressors do not have the flexibility of belt-driven air compressors. Since there is no pulley mechanism between the crankshaft and motor, the pressure or speed is not readily adjustable.
For example, your direct drive model may have a maximum of 118 PSI, but you need 130 PSI for one of your tools. You would not be able to increase the PSI of your compressor to meet the requirements of your tool.
The direct connection between the crankshaft and the motor can make repairs more expensive and complex when they do occur. For example, a malfunctioning motor can damage connected parts. Other costly and time-consuming repairs cover bearing, shaft seal and gearbox damage from oil loss.
Excessive noise is a health hazard and a disadvantage in some settings. You would not want to use a direct drive compressor in your garage or indoors near other work stations.
Since the crankshaft is directly attached to the motor, it does not run as smoothly as a lubricated belt drive compressor. The noise level would likely disturb your neighbours or people at nearby workstations.
You want your equipment purchase to fit your budget as well as your long-term needs. The initial cost is higher for a direct drive model and is a disadvantage for the home woodworker. While this investment can pay for itself with constant industrial use, it would not be worthwhile for intermittent use.
When choosing a compressor, performance and safety are equally important considerations. An air compressor that does not have the proper PSI capacity for your tools can result in property or equipment damage or personal injury.
The type of compressor you choose can affect your energy bill, work flexibility and safety. The differences between belt drive and direct drive air compressors are well worth learning.
At Express Compressors, we can help you find the best air compressor for your specific needs. Get in touch with us today or call us on 1300 446 944 if you would like to know more about direct drive or belt driven air compressors.
Whether you are the owner of an Australian business or managing Australian operations for a multi-national company, you need to know that your electric compressed air equipment is built tough and optimised for Australian environmental conditions. You also need to be able to count on professional service teams across Australia at any time of the day. Express Compressors Australia has you covered.
Take a look at our amazing inventory – the very best air compressors, air dryers, and other air products – today.