YOKOHAMA fabric conveyor belts have been supplied to a wide range of applications. From mine to port, power plants to cement, chemicals, fertilizers and agribusiness, the performance is proven in many different industries.
Available belt strengths ranges from 100N/mm up to 2,500N/mm covering a variety of applications.
Most of YOKOHAMA’s original high performance cover compounds are available with wide range of cover gauges.
Superior resistance to bending fatigue and outstanding rubber adhesion to fabric realize longer service life.
Ensure maximum conveying capacity.
Hot vulcanized splice is recommended. YOKOHAMA offers industry proven splice technology.
Carcasses ; Nylon/Nylon (NN) and Polyester/Nylon (EP)
Belt strength ; from 100N/mm to 2,500N/mm
Belt width ; 300mm - 2,400mm
Please consult with your local YOKOHAMA sales representative for more belt strength and size availability.
YOKOHAMA’s original carcass design allows outstanding fastner holding.
Eliminate long vulcanizing time and complex splice process.
Applicable to conveyor with smaller pulleys.
| GRADES | 150 | 220 | 330 | 440 | 550 | ||
|---|---|---|---|---|---|---|---|
| CONSTRUCTION | MJ-75 X 2P | MJ-110 X 2P | MJ-110 X 3P | MJ-110 X 4P | MJ-110 X 5P | ||
| TENSTION RATING VULCANIZED AND FASTENER |
(N/mm) (lbs/in) |
25 150 |
40 220 |
60 330 |
80 440 |
95 550 |
|
| APPROX. BELT THICKNESS (1/8” X 1/16” COVERS) |
(mm) (in) |
8.1 0.319 |
8.0 0.315 |
9.7 0.382 |
11.7 0.461 |
13.7 0.539 |
|
| APPROX BELT WEIGHT (1/8” X 1/16” COVERS) |
(kg/m2) (lbs/ft2) |
9.3 1.9 |
9.2 1.9 |
11.2 2.3 |
13.5 2.8 |
15.8 3.2 |
|
| MIN. WIDTH FOR TROUGHING EMPTY 35° IDLERS |
(mm) (in) |
400 16 |
450 18 |
600 24 |
750 30 |
900 36 |
|
| MAX. WIDTH ON 35° IDLERS FULLY LOADED WITH 100# MATERIAL |
(mm) (in) |
750 30 |
900 36 |
1200 48 |
1500 60 |
1800 72 |
|
| RECOMMENDED MIN. PULLEY DIAMETERS |
OVER 80% TENSION |
(mm) (in) |
400 16 |
450 18 |
600 24 |
750 30 |
900 36 |
| OVER 60 TO 80% TENSION |
(mm) (in) |
350 14 |
400 16 |
500 20 |
600 24 |
750 30 |
|
| OVER 40 TO 60% TENSION |
(mm) (in) |
300 12 |
350 14 |
400 16 |
500 20 |
600 24 |
|
| TO 40% TENSION |
(mm) (in) |
250 10 |
300 12 |
350 14 |
450 18 |
500 20 |
|
| TAIL & SNUB |
(mm) (in) |
||||||
| RECOMMENDED FASTENERS | FLEXCO #140 FLEXCO R5 |
FLEXCO #190 FLEXCO R5 |
FLEXCO #140 FLEXCO R5 |
FLEXCO #190 FLEXCO R6 |
FLEXCO #2 FLEXCO R6 |
||
| RECOMMENDED TAKE-UP SPACE AS % OF CENTER DISTANCE |
MIN. 1.5% FOR POLYESTER AND MIN. 2.4% FOR NYLON (MIN. 500 MM OR 2 ’) | ||||||
Discover the PROTEX difference today
Because you deserve better performance from your investment!
Does your portable crushing and other high abuse equipment suffer from product entrapment that punctures your expensive belts resulting in costly repairs or premature belt replacement? Excessive cover abrasion? Premature gouging and wear?
Yokohama PROTEX with UR Covers. Designed to be virtually “Maintenance Free” belts for portable quarry crushing and other high abuse equipment, PROTEX belts give you greater peace-of mind with the lowest cost per tonnage and best ROI on the market today.
Nylon Fabric Belt
630 2Ply 8x3mm covers
Polyester Fabric Belt
630 2Ply 8x3mm covers
PROTEX
630 2Ply 8x3mm covers
Yokohama PROTEX features a special polyester fabric with elongation at break 1.8 times higher than Nylon fabric. Nevertheless, belt stretch under operating tension is less than that of conventional polyester fabric belts.
Comparison of belt stretch at normal & abnormal operation
| PERMANENT ELONGATION | TAKE-UP TRAVEL | |
|---|---|---|
| NYLON FABRIC: | 1.3 - 1.8% | over 2.4% |
| CONVENTIONAL POLYESTER: | 0.5 - 1.0% | over 1.5% |
| PROTEX: | 0.5 - 0.7% | over 1.0% |
UR covers were initially developed by Yokohama to handle heavy limestone rock before and after primary crushers. UR cover belts have succeeded in improving belt life with superior impact and gouge resistance features superior to that of RMA-1 cover belts.
PROTEX belt absorbs impact like no other belts.
PROTEX BELTS = TOUGH, FLEXIBLE, AND LOW-STRETCH
Let us show you how Yokohama PROTEX belts can take the abuse & deliver!
BELT SELECTION:
| BELT STRENGTH |
NO. OF PLIES |
COVER RUBBER THICKNESS |
BELT WIDTH | BELT THICKNESS |
LENGTH /R |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (N/MM) | 500 | 600 | 700 | 750 | 800 | 900 | 1000 | 1050 | 1200 | 1400 | ||||
| 500 | 2 | 6.0 x 3.0 | * | * | * | * | * | * | 12.4 | 200 | ||||
| 630 | 2 | 8.0 x 3.0 | * | * | * | * | 15.1 | 200 | ||||||
*Belt strength such as 1000/4 and 1250/4 for large lump material transportation or other than above specifications are available.